SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
94
4UZK
To ensure that system logs can be sent to a log server, choose Network > LAN Setup and set the IP address, subnet
mask, and gateway of the AP for communicating with the log server.
mask, and gateway of the AP for communicating with the log server.
Procedure for adding a log server
1.
Choose Tools > Logs and click Log Setup.
2.
Click Add.
3.
Set parameters as follows:
(1)
Set Log Server IP to the IP address of the log server.
(2)
Set Log Server Port to the UDP port number used to send and receive system logs. The
default port number 514 is recommended.
default port number 514 is recommended.
(3)
Select Enable to enable the log server function.
4.
Click Save.
5.
Select Enable (To use the following rules, you must check this box.).
6.
Click Save.
The following figure shows an example of log server settings.
---End