SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서

 

96 

 

If an computer connected to the AP cannot access the internet for unknown reasons, or you forget 
the login password, you are recommended to restore the router to factory settings and reconfigure 
the AP can be reset using software or hardware. 

After the factory settings are restored, the login IP address of the AP is changed to 192.168.0.254, 
and the user name and password of the AP are changed to admin. 

4UZK

 

− 

When the factory settings are restored, your configuration is lost. Therefore, you need to reconfigure the AP to 
connect to the internet. Restore the factory settings of the AP only when necessary. 

− 

To prevent AP damages, ensure that the power supply of the AP is normal when the AP is reset. 

Choose Tools > Configuration and click the Restore to Factory Default tab. 

Click the Restore to Factory Default button. 

 

This method enables you to restore the factory settings without logging in to the web UI of the AP. 

Procedure: 

After the AP is powered on, use a pin to hold down the RST button for 8 seconds. 

Wait about 45 seconds.