SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
74
3.
Set
Total Bandwidth of AP to the total bandwidth provided by your ISP.
4.
Select an enabled SSID from the Select enabled SSID drop-down list box for traffic control.
5.
Set the SSID-specific maximum upload and download speeds in the Radio X: Selected SSID
text boxes.
text boxes.
6.
Click Save.
---End
Parameter description
Parameter
Description
Total Bandwidth of AP
It specifies the total uplink bandwidth and downlink bandwidth provided by your ISP.
For details about the other parameters, refer to the preceding table.
Example of Configuring Traffic Control
Networking Requirement
A mall has a 100 Mbps optical internet connection. It requires 10 APs for wireless coverage. Each
AP is configured with 2 SSIDs. One of the SSID is used for the owner network and named VIP, and
the other SSID is used for the guest network and named Mall.
AP is configured with 2 SSIDs. One of the SSID is used for the owner network and named VIP, and
the other SSID is used for the guest network and named Mall.
Each AP has a bandwidth of 10 Mbps. The other requirements are as follows:
For each AP, the bandwidth for the owner SSID is limited to 6 Mbps and the bandwidth for the
guest SSID is limited to 4 Mbps.
If some owners use excessive bandwidth to download resources or watch online videos, the
internet experience of the other owners will be affected. To prevent this problem, the per-client
bandwidth of the owner network is limited to 1 Mbps.
bandwidth of the owner network is limited to 1 Mbps.
If some guests use excessive bandwidth to download resources or watch online videos, the
internet experience of the other guests will be affected. To prevent this problem, the per-client
bandwidth of the guest network is limited to 1 Mbps.
bandwidth of the guest network is limited to 1 Mbps.