Eastech Electronics Co. Ltd MSB45X0 사용자 설명서
8
4 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
4.1 Position the SoundBar.
Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
4.2 Wall mount the
SoundBar (optional).
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
> 25mm
3.5-4mm
4mm
See the illustration in the quick start guide on
how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
Warning
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
•
Funai is not liable for improper wall mounting that result
in accident, injury or damage.
in accident, injury or damage.
•
Install the Soundbar on the sturdy vertical wall.
•
Do not install the Soundbar onto a ceiling or slanted
wall, it may easy to fall down and result in severe
injury.
•
Do not use the screws that are shorter than the
specified length, it may cause the Soundbar to fall
down easily.
•
Do not mount the Soundbar on a wall while the
Soundbar is plugged in or turned on, it may result in
an electrical shock injury.
Soundbar MSB4550_DFU_20140522.indd 8
2014/5/22 04:48:12