Eastech Electronics Co. Ltd MSB45X0 Manual Do Utilizador

8

4  Connect and set 

up

This section helps you connect your SoundBar 

to a TV and other devices, and then set it up.

For information about the basic connections of 

your SoundBar and accessories, see the quick 

start guide.

Note

 

•

For identification and supply ratings, see the type plate 

at the back or bottom of the product.

 

•

Before you make or change any connections, make sure 

that all devices are disconnected from the power outlet.

4.1  Position the SoundBar.

Place the subwoofer at least 1 meter (3 feet) 

away from your SoundBar, and ten centimeters 

away from the wall.

For best results, place your subwoofer as shown 

below.

4.2   Wall mount the 

SoundBar (optional).

Screw length/diameter

Depending on the type of wall mounting your

SoundBar, make sure that you use screws of a

suitable length and diameter.

> 25mm

3.5-4mm

4mm

See the illustration in the quick start guide on

how to wall mount the SoundBar.

1) Drill two holes on the wall.

2) Secure the dowels and screws in the holes.

3) Hang the SoundBar on the fastening screws. 

Warning

 

•

Improper wall mounting may result in accident, injury or 

damage. If you have any query, contact Consumer Care 

in your country.

 

•

Before wall mounting, make sure the wall can support 

the weight of your SoundBar.

 

•

Funai is not liable for improper wall mounting that result 
in accident, injury or damage.

 

•

Install the Soundbar on the sturdy vertical wall.

 

•

Do not install the Soundbar onto a ceiling or slanted 

wall, it may easy to fall down and result in severe 

injury.

 

•

Do not use the screws that are shorter than the 

specified length, it may cause the Soundbar to fall 

down easily.

 

•

Do not mount the Soundbar on a wall while the 

Soundbar is plugged in or turned on, it may result in 

an electrical shock injury.

Soundbar MSB4550_DFU_20140522.indd   8

2014/5/22     04:48:12