Extron Electronics EXTSL250W 사용자 설명서

 

Connecting to the ShareLink 250 W receiver

Use the software to connect to the ShareLink 250 W receiver as follows:

Open the ShareLink 250 W software. 
The software searches for available 
receivers on your network and the 
Choose a Receiver dialog box 

opens as shown at right.

NOTE:  The 

 

button allows Wi-Fi users to 
search and connect to ShareLink 
receivers on other Wi-Fi networks 
(see 

 below for 

instructions).

Select your ShareLink 250 W device from the Receiver Hostame section and click 
Connect.

NOTE:  The receiver name is shown on the standby screen. If your ShareLink unit is 

not listed, click the refresh button. If the device still does not appear, click Manual 

and enter the receiver IP address manually.

If the login dialog box appears, enter the login 
code into the Code field and click Connect.

NOTE:  The login code is shown on the 

standby screen (see 

NOTE: 

 

A room file can be created for the ShareLink 250 W software to connect 

automatically to a designated receiver (see 

 on page 19).

Other receivers

The Other Receivers button allows Wi-Fi users to search and connect to ShareLink 

receivers on all available Wi-Fi networks. To do so:

Click Other Receivers. The Choose a Connection dialog box opens as shown 

below.

• 

Select Show Receiver  
Wi-Fi networks to see a list 

of the ShareLink receivers on all 
available Wi-Fi networks.

NOTE:

 

This option filters 

by SSID name. It only lists 
receivers whose SSID starts 
with “ShareLink.” If the SSID is 
changed and no longer starts 
with “ShareLink,” the receiver 
is not shown.

• 

Select Show all Wi-Fi networks to see a list of the ShareLink receivers as 

well as a list of all available Wi-Fi networks.

NOTE:

 

If you connect to a Wi-Fi network, and the Wi-Fi network is  

password-protected, you are asked to enter the network password.

Click on your ShareLink receiver or network, and click Connect.