Tesla Motors Inc 1089773E 사용자 설명서

Note: The interior release button glows

following a brief exposure to ambient light.

Warning: People should never climb
inside the front trunk. Never shut the
front trunk when a person is inside.
Warning: Care should be taken to ensure

that objects inside the front trunk do not
bump against the release button, causing

the trunk to accidentally open.

In the unlikely event that Model 3 has no 12V
power, you will be unable to open the front

trunk using the touchscreen or mobile app. To
open the front trunk in this situation:

Locate an external 12V power supply
(such as a portable jump starter).

2. Release the tow eye cover by pressing

firmly on the top right perimeter of the
cover until it pivots inward, then gently
pulling the raised section toward you.
Note: The tow eye cover is connected to
the vehicle's red positive (+) terminal.

3. Pull the two wires out of the tow eye

opening to expose both terminals.

4. Connect the 12V power supply's red

positive (+) cable to the red positive (+)
terminal.

5. Connect the 12V power supply's black

negative (-) cable to the black negative (-)

terminal.

Note: Applying external 12V power to

these terminals only releases the hood
latches. You cannot charge the 12V
battery using these terminals.

6. Turn on the external power supply (refer

to the manufacturer’s instructions). The
hood latches are immediately released
and you can now open the hood to access
the front trunk area.

7. Disconnect both cables, beginning with

the black negative (-) cable.

8. If pulling Model 3 onto a flatbed truck, do

not replace the tow eye cover yet.

Otherwise, replace the tow eye cover by
inserting the wires into the tow eye

opening and aligning the tow eye cover
into position and turning it into place.

Opening and Closing

15

DRAFT 

DO 

NOT 

DISTRIBUTE