Tesla Motors Inc 1089773E 사용자 설명서

The seat, head support, seat belt and airbags
work together to maximize your safety. Using

these correctly ensures greater protection.

Position the seat so you can wear the seat belt
correctly, while being as far away from the

front airbag as possible:
1.

Sit upright with both feet on the floor and
the seat back reclined no more than 30

degrees.

2. Make sure you can easily reach the pedals

and that your arms are slightly bent when
holding the steering wheel. Your chest
should be at least 10 inches (25 cm) from
the center of the airbag cover.

3. Place the shoulder section of the seat belt

mid-way between your neck and your
shoulder. Fit the lap section of the belt
tightly across your hips, not across your

stomach.

Model 3 seats include integrated head
supports that cannot be adjusted or removed.

Model 3 has a split rear seat that can fold
forward.
Before folding, remove items from the seats
and the rear footwell. To allow the rear seat
backs to fold completely flat, you may need to

move the front seats forward.

To fold a rear seat, pull the corresponding

lever and fold the seat forward.

Before raising a rear seat, make sure that the

seat belts are not trapped behind the
backrest.
Pull the seat back upward until it locks into
place.
To confirm that the seat back is locked in the
upright position, try pulling it forward.

Warning: Always ensure the seat backs

are locked in their upright position.
Failure to do so increases the risk of

injury.

Seating and Safety Restraints

17

DRAFT 

DO 

NOT 

DISTRIBUTE