Cleer Limited BT201501 사용자 설명서
3 – Get started
Charge your headset
Connect the supplied USB charging cable to :
the USB connector of the headset and
;
USB power source
LED turns red light during charging and turns
blue light when the headset is fully charge
LED turns red flash light during low battery
blue light when the headset is fully charge
LED turns red flash light during low battery
Notes
Before you use your headset for the first time, charge the battery for
3 hours for optimum battery capacity and lifetime
Use only the supplied USB charging cable to avoid any damage
You can operate the headset normally during charging
When the battery is empty, you can carry on listening music with an
audio cable.
3 hours for optimum battery capacity and lifetime
Use only the supplied USB charging cable to avoid any damage
You can operate the headset normally during charging
When the battery is empty, you can carry on listening music with an
audio cable.
Pairing headset
Before you use the headset with your mobile phone / Bluetooth device for the first time, pair it
with a mobile phone / Bluetooth device .
with a mobile phone / Bluetooth device .
Turn on your mobile phone / Bluetooth device
Turn on the power
Press and hold the Bluetooth pair button
Turn on the power
Press and hold the Bluetooth pair button
5
- >
- >
LED turns Blue / red flash light during
pairing and turns blue flash light when
the headset is paired
pairing and turns blue flash light when
the headset is paired
the headset is reconnect to the last
connected mobile phone / Bluetooth
device automatically.If the last one is
not available, the headset tries to
reconnect to the second last connected
device.
connected mobile phone / Bluetooth
device automatically.If the last one is
not available, the headset tries to
reconnect to the second last connected
device.
- >
LED turns red flash light when disconnected
- >
- >
2
OFF
ON
2 Sec 3
1
English