Cleer Limited BT201501 Manual Do Utilizador

Connect the supplied USB charging cable to : 

the USB connector of the headset and

;

USB power source

LED turns red light during charging and turns 
blue light when the headset is fully charge
LED turns red flash light during low battery 

Notes

Before you use your headset for the first time, charge the battery for 
3 hours for optimum battery capacity and lifetime
Use only the supplied USB charging cable to avoid any damage
You can operate the headset normally during charging
When the battery is empty, you can carry on listening music with an 
audio cable.

Before you use the headset with your mobile phone / Bluetooth device for the first time, pair it 
with a mobile phone / Bluetooth device .

     Turn on your mobile phone / Bluetooth device
     Turn on the power
     Press and hold the Bluetooth pair button

5

- >

- >

LED turns Blue / red flash light during 
pairing and turns blue flash light when 
the headset is paired

the headset is reconnect to the last 
connected mobile phone / Bluetooth 
device automatically.If the last one is 
not available, the headset tries to 
reconnect to the second last connected 
device.

- >

LED turns red flash light  when disconnected

- >

- >

2

OFF

ON

2 Sec 3

1

English