Maxtor NVR-2028 사용자 설명서

MOTION:

Take the steps detailed below to activate a programmed motion detection. For MOTION SETTING,

as well as its two distinct functions of MOTION ENABLE and SENSITIVITY / REGION.

(1) Press

the

Setup button

to enter the MAIN MENU.

(2) Select the item termed "LAN CAMERA" and press the Enter button

to enter the

LANCAM SETTING page.

(3) Select the item termed "MOTION" and push the Enter button

to enter the MOTION

SETTING page.

(4) To activate the motion detection function, set "MOTION ENABLE" to "ON". To deactivate the

function, set "MOTION ENABLE" to " OFF" The items termed "OFF" and "ON" switch all the

channels in the MOTION ENABLE SETTING page off and on respectively as well. If you wish

to select individual channels for viewing, select the item termed " SET" and activates your

desired channels by pressing them "ON" while turning the rest "OFF". Confirm your choices

by pressing "OK". If not, push "CANCEL".

(5) In

the

MOTION SETTING page, select the entry termed "SENSITIVITY / REGION" and press

the “>” button

to show all the channels in their order, each in turn. Use the “

” button

and the “v” button

to select a desired channel for setting. Press the Enter button

and

set the channel in the SENSITIVITY / REGION SETTING page. Repeat the process for all

other channels you choose.

(6) To set "SENSITIVITY" and "REGION" for activation on the SENSITIVITY / REGION page,

choose your degree of sensitivity and then push the Enter button

. At once the legends

"OK" and "CANCEL" appear at the bottom of the page. Now press the “<” button

and the

“>” button

to confirm either "OK" or "CANCEL" respectively.