Maxtor NVR-2028 사용자 설명서

 

41

 

The NVR-2028 provides a weekly table, consisting of two periods of time each day for scheduled 
recording. This option allows you to set the time each day that the NVR will start and stop recording. 

CLOCK SETTING:   

This entry allows users to set the system time. 

 

 

 
TIMER:   

This entry allows users to program the time each day that the NVR will start and stop recording. 
There are two time periods each day available for scheduling. The time is displayed in a 24-hour 
clock format. If there is a time overlapping showing between two continual time period settings, the 
device will automatically combine the two time-period settings into one combined time-period 
setting. 
 TIMER ENABLE: This option enables/disables the programmed scheduled recording. 
ON: Enables the scheduled recording. 
OFF: Disables the scheduled recording. 

 
 
 
 
 
 
 
 
 
 

 

SEQUENCER:   

To regulate dwell time of the sequencer, you can use the “

” button 

  and the “v” button 

 to 

select dwell time provided here, ranging from the "00" to the "30".you can set individual channels 
in different dwell time. After set individual channels, quad and multi screen in different modes and 
then push the Enter button 

. At once the legends "OK" and "CANCEL" appear at the bottom 

of the page. Now press the “<” button 

  and the “>” button 

  to confirm either "OK" or 

"CANCEL" respectively. Press "OK" to ratify your choice(s). If not, press "CANCEL".

 

 

 

 

 

 

 

●

 

●

 

●

 

●

 

 

 

●

 

●

 

●

 

●