Troy-Bilt 12235 사용자 설명서

NOTE: Do not use gasoline containing methanol (wood al-
cohol). Fuel containing up to 10% ethanol (gasohol) or up to
15% MTBE (Methyl Tertiary Butyl Ether) may be used, but re-
quires special care when the engine is not used for extended
periods.  See “STORAGE” instructions in Engine Owner’s
Manual for additional information.

3. The fuel/oil mix ratio is 24:1 with the use of a NMMA clas-
sified oil. For new engines, use twice the normal oil quantity
for the first gallon of fuel.  NOTE: Due to differences in fuel and
oil availability worldwide, Tecumseh recommends a 16:1 mix
ratio if NMMA oil is not available.

4. Do not mix fuel directly in engine fuel tank. Always use a
clean, safety-approved fuel container.

A. Fill a clean, approved container one quarter full with rec-

ommended gasoline.  

B. Add recommended amount of oil per Chart 1: FUEL

MIXTURE.

C. Screw cap on container and shake vigorously.  Then un-

screw cap and fill container with gasoline per 
Chart 1: FUEL MIXTURE.  Screw on cap and shake again.
Once mixed, oil and gasoline will not separate.

A. Engine must be cool. Clean area around fuel tank cap and

remove cap.  Insert a clean funnel into the fuel tank.

B. Slowly pour gasoline/oil mixture into fuel tank.  Fill tank no

higher than 1/2" from top of tank to allow for gasoline ex-
pansion.  Install fuel cap and clean up any fuel spills.

(Mixture Ratio is 24 parts gasoline to 

1 part two-cycle oil)

1 Gal.

5 oz.

2 Gal.

11 oz.

4 liters

167 ml

8 liters

333 ml