ZyXEL Wireless Access Point G1000 91-005-124003B 사용자 설명서

G-1000 User’s Guide

Chapter 13 LAN Setup

101

Follow the instructions in the following table on how to configure the fields in this menu.

Use menu 3.5 to set up your G-1000 as the wireless access point. To edit menu 3.5, enter 3 
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then 
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next. 

                  Menu 3.2 - TCP/IP Setup
         IP Address Assignment= Static
           IP Address= 192.168.1.2
           IP Subnet Mask= 255.255.255.0
           Gateway IP Address= 0.0.0.0

Table 42   Menu 3.2 TCP/IP Setup

IP Address 

Assignment

Press [SPACE BAR] and then [ENTER] to select Dynamic to have the G-1000 

obtain an IP address from a DHCP server. You must know the IP address assigned 

to the G-1000 (by the DHCP server) to access the G-1000 again. 
Select Static to give the G-1000 a fixed, unique IP address. Enter a subnet mask 

appropriate to your network and the gateway IP address if applicable.

IP Address

Enter the (LAN) IP address of your G-1000 in dotted decimal notation

IP Subnet Mask

Your G-1000 will automatically calculate the subnet mask based on the IP address 

that you assign. Unless you are implementing subnetting, use the subnet mask 

computed by the G-1000.

Gateway IP 

Address

Type the IP address of the gateway. The gateway is an immediate neighbor of your 

G-1000 that will forward the packet to the destination. On the LAN, the gateway 

must be a router on the same network segment as your G-1000.

When you have completed this menu, press [

ENTER

] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [

ESC

] at any time to cancel.