ZyXEL 202H 91-003-194003B 사용자 설명서
제품 코드
91-003-194003B
P-202H Plus v2 User’s Guide
159
Chapter 15 Introducing the SMT
For your first login, enter the default password “1234”. As you type the password, the screen
displays an asterisk “*” for each character you type.
displays an asterisk “*” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your
ZyXEL Device will automatically log you out and displays a blank screen. If you see a blank
screen, press [ENTER] to bring up the login screen again.
ZyXEL Device will automatically log you out and displays a blank screen. If you see a blank
screen, press [ENTER] to bring up the login screen again.
Figure 72 Login Screen
15.3 Procedure for SMT Configuration via Telnet
The following procedure details how to telnet into your ZyXEL Device.
1 In Windows, click Start (usually in the bottom left corner), Run and then type “telnet
192.168.1.1” (the default IP address) and click OK.
2 Enter “1234” in the Password field.
3 After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period)
after you log in, your ZyXEL Device will automatically log you out. You will then have to
telnet into the ZyXEL Device again.
after you log in, your ZyXEL Device will automatically log you out. You will then have to
telnet into the ZyXEL Device again.
15.4 SMT Menu Overview
The following table gives you an overview of your ZyXEL Device’s various SMT menus.
Enter Password : ****
Table 52 SMT Menus Overview
MENUS
SUB MENUS
1 General Setup
1.1 Configure Dynamic DNS
2 ISDN Setup
2.1 ISDN Advanced Setup
2.2 NetCAPI Setup
3 Ethernet Setup
3.1 General Ethernet Setup
3.2 TCP/IP and DHCP Setup
3.2.1 IP Alias Setup
4 Internet Access Setup
11 Remote Node Setup
11.1 Remote Node Profile
11.2 Remote Node PPP Options
11.3 Remote Node Network Layer
Options
11.5 Remote Node Filter