ZyXEL 202H 91-003-194003B Manual Do Utilizador

P-202H Plus v2 User’s Guide

159

Chapter 15 Introducing the SMT

For your first login, enter the default password “1234”. As you type the password, the screen 
displays an asterisk “*” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your 
ZyXEL Device will automatically log you out and displays a blank screen. If you see a blank 
screen, press [ENTER] to bring up the login screen again.

Figure 72   Login Screen

The following procedure details how to telnet into your ZyXEL Device.

1 In Windows, click Start (usually in the bottom left corner), Run and then type “telnet 

192.168.1.1” (the default IP address) and click OK. 

2 Enter “1234” in the Password field.

3 After entering the password you will see the main menu.

Please note that if there is no activity for longer than five minutes (default timeout period) 
after you log in, your ZyXEL Device will automatically log you out. You will then have to 
telnet into the ZyXEL Device again.

The following table gives you an overview of your ZyXEL Device’s various SMT menus.

Enter Password : ****

Table 52   SMT Menus Overview 

1 General Setup

1.1 Configure Dynamic DNS

2 ISDN Setup

2.1 ISDN Advanced Setup

2.2 NetCAPI Setup

3 Ethernet Setup

3.1 General Ethernet Setup

3.2 TCP/IP and DHCP Setup

3.2.1 IP Alias Setup

4 Internet Access Setup

11 Remote Node Setup

11.1 Remote Node Profile

11.2 Remote Node PPP Options

11.3 Remote Node Network Layer 

Options

11.5 Remote Node Filter