Tandberg Data Streamer SCSI DLT-V4 Internal Grey 7301 7088 00 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Tabletop SCSI Tape Drive

DLT-V4 Product Manual

11

Figure 4  Server SCSI Cable 
Connections

2

You must terminate the tape drive if it is the last physical device on the 

SCSI bus (at the end of the SCSI chain). If another SCSI device is the last 

device on the SCSI bus, confirm that it is properly terminated and do not 

terminate the tape drive.

To terminate the tape drive, locate the terminator in the accessories 

package and press it firmly into either of the two SCSI connectors on the 

rear panel of the tape drive. Secure the terminator by tightening the 

screws until snug. See 

 for more details.

Regardless of which device terminates the SCSI bus, it must 

have power applied and be powered on for proper 

termination to occur.