Tandberg Data SCSI DLT-V4 Internal Grey 7301708800 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Internal SCSI Tape Drive

DLT-V4 Product Manual

15

2

Before you do anything else, unpack and inspect the tape drive for 

shipping damage. If you notice any damage, report it both to the sales 

representative and to the shipping company immediately.

If there is no damage to the tape drive, select a server or workstation to 

host the tape drive, then move on to the following installation steps.

2

Configuring the tape drive is fast and easy. You only need to select a 

unique SCSI ID and decide if the tape drive needs to be terminated. The 

following sections explain how to configure the tape drive.

9

Connect the SCSI cable to the tape drive and 

SCSI host adapter.
Connect the terminator on the tape drive—if it 

is the last or only device on the SCSI bus.

10

Connect a power cable to the tape drive.

11

Secure the tape drive in the selected server or 

workstation.

12

Install the server or workstation’s cover, 

connect power cables to all peripheral devices, 

and apply power to the server or workstation 

and all peripheral devices.

13

Check the tape drive to make sure it is 

working properly.

Save the packing materials in case you need to move or ship 

the tape drive in the future. You must ship the tape drive in 

the original (or equivalent) packing materials or you will 

invalidate the warranty.