Tandberg Data SCSI DLT-V4 Internal Grey 7301708800 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Internal SCSI Tape Drive

DLT-V4 Product Manual

16

2

All SCSI devices attached to the server or workstation that is to host the 

tape drive must have a unique SCSI ID. Check the SCSI IDs on all other 

devices on the selected server or workstation, including the SCSI host 

adapter, and select an unused SCSI ID for the tape drive. The factory 

default SCSI ID is 5. If the tape drive’s factory default SCSI ID is not being 

used, you do not need to change the SCSI ID.

Locate the SCSI ID jumpers on the rear panel of the tape drive, as shown 

in 

Figure 6  Rear Panel 
Connections for the Internal 
SCSI Tape Drive

Use the supplied jumpers to select the desired SCSI ID as shown in 

:

Table 3   Selecting the SCSI ID

If you plan to attach the tape drive to a narrow (50-pin) SCSI 

bus, you can only use IDs 0 through 7.