Netgear GS516TP GS516TP-100EUS 사용자 설명서
제품 코드
GS516TP-100EUS
Physical Description
14
GS516TP Gigabit PoE Smart Switch
Reset Button
The smart switch has a Reset button on the front panel to allow you to manually reboot the
switch. This action is equivalent to powering the unit off and back on. The last saved
configuration is loaded into the switch as it resets. To operate the Reset button, insert a
device such as a paper clip into the opening to press the recessed button. The front panel
LEDs turn off and light again as the switch performs its power-on self-test (POST).
switch. This action is equivalent to powering the unit off and back on. The last saved
configuration is loaded into the switch as it resets. To operate the Reset button, insert a
device such as a paper clip into the opening to press the recessed button. The front panel
LEDs turn off and light again as the switch performs its power-on self-test (POST).
Factory Defaults Button
The smart switch has a Factory Defaults button on the front panel so that you can remove the
current configuration and return the device to its factory settings. When you press the Factory
Defaults button, all settings including the password, VLAN settings, and port configurations
are removed. To operate the Factory Defaults button, insert a device such as a paper clip
into the opening to press the recessed button for over two seconds.
current configuration and return the device to its factory settings. When you press the Factory
Defaults button, all settings including the password, VLAN settings, and port configurations
are removed. To operate the Factory Defaults button, insert a device such as a paper clip
into the opening to press the recessed button for over two seconds.