Fracarro SIG7100 283949 사용자 설명서
제품 코드
283949
Receiver DVB-S_CI
TS
SIG7340
The SIG7340 module, using its common interface slot,
distributes a free-to-air or encrypted digital signal from
a DVB-S source.
It enables the audio/video signal to be available as a
transport stream in MPEG2/MPEG4 format, distributed
from the back panel.
In a typical application it can be connected to an
SIG7120 module (modulator) that uses the transport
stream to create a COFDM multiplex. It can also be
connected to an IP encoder SIG7720 creating multiple
IP multicast streams.
A specific feature has been integrated in the SIG7340:
it can be used as a CAM extender when needed, it
means that it can be used between the first receiver
and the modulator to decrypt extra programmes in the
Transport Stream provided by the first receiver
It can also be installed as a single unit to distribute one
program
distributes a free-to-air or encrypted digital signal from
a DVB-S source.
It enables the audio/video signal to be available as a
transport stream in MPEG2/MPEG4 format, distributed
from the back panel.
In a typical application it can be connected to an
SIG7120 module (modulator) that uses the transport
stream to create a COFDM multiplex. It can also be
connected to an IP encoder SIG7720 creating multiple
IP multicast streams.
A specific feature has been integrated in the SIG7340:
it can be used as a CAM extender when needed, it
means that it can be used between the first receiver
and the modulator to decrypt extra programmes in the
Transport Stream provided by the first receiver
It can also be installed as a single unit to distribute one
program
through
RCA
outputs
(for
MPEG-2
compressed programs).
Main Specifications
-
QPSK satellite receiver with transport stream output
via the back panel
via the back panel
-
CI slot for encrypted programs
-
Compatible with MPEG2/MPEG4 compression
-
It can generate 14 or 18V, 22KHz tone and DiSEqC
1.0, suitable to power an LNB or to control
multiswitch output
1.0, suitable to power an LNB or to control
multiswitch output
-
Remote configuration and monitoring (via controller
host SIG7905 and FHM software)
host SIG7905 and FHM software)
-
Loop-through input for the connection of several
receivers on the same SAT polarity
receivers on the same SAT polarity
-
RCA outputs for testing or the distribution of one
MPEG2 compressed program
MPEG2 compressed program
-
HD Compliant
SIG7340
Fracarro code
283955
SAT Input
Frequency input
MHz
950 - 2150
Minimum frequency step tuning
MHz
1
AFC
MHz
±5
Input level
dBµV
48 - 85
Loop-through insertion loss
dB
2 maximum
Symbol rate
MSy/s
2 – 40
FEC
1/2, 2/3, 3/4, 5/6, 7/8, auto
LNB power supply
0/14/18Vdc, 0-22KHz – max 200mA@14Vdc
DiSEqC
1.0 (4 position)
Common Interface
Connector
PCMCIA
Standard
EN50221, TS101699