Tandberg Data StorageLoader 2U LTO, 1 x 10 LTO-3 052102 사용자 설명서
제품 코드
052102
A
PRIL
2007
S
TORAGE
L
OADER
2U LTO
171
R
EPLACING
A
T
APE
D
RIVE
(
SAME
CONFIGURATION
)
Full height tape drive:
Serial—Route the serial cable (
S
) under the tape drive carrier as shown here;
connect as shown in
(FH serial cable routing).
Power—Route the power cable over the tape drive carriers as shown here;
connect as shown in
(FH power cable routing).
Second Half height tape drive: Install the tape drive in the upper opening.
Serial—Route the serial cable (
S
) over the tape drive carrier and under the
(HH serial cable routing).
Power—Route the power cable under the tape drive carrier as shown here;
connect as shown in
(HH power cable routing).
Figure 7-9 Full height tape drive’s serial and power connectors
Serial cable
(S)
(route under carrier)
Do not use
middle connector
with full height
tape drive
middle connector
with full height
tape drive
Power cable
(P)
(route over carrier)
Figure 7-10 Upper half height tape drive cable routing
Serial cable
(S)
Tape drive
(route over
carrier and
under the
power cable)
carrier and
under the
power cable)
carrier
Press the serial cable (C) down into the
carrier to prevent catching it between
the tape drive and the library.
carrier to prevent catching it between
the tape drive and the library.
Power cable
(P)
(route under carrier
and over serial cable)
and over serial cable)