AEG AR 4020 400400 사용자 설명서

68

To protect against theft remove the front panel. Do not 

keep the front panel in the car.

 

Keep the front panel in its casing.

 

►

Do not touch the contacts on the unit or on the 

 

►

front panel.

Set the control panel with the left-hand side first into 

 

‹

the frame.

Then push the right-hand side in until it clicks into 

 

‹

place.

Flip the control panel up until it clicks into place.

 

‹

Ensure the front panel is attached properly. If the front 

 

‹

panel is not attached properly this can cause malfunc-

tions.

Press the release button (1) and flip the control panel 

 

‹

down. 

Then pull gently on the right-hand side of the control 

 

‹

panel to detach the control panel.

This chapter gives important operating instructions for 

the unit.

Press the button 

 

‹

/MUTE (11) to switch on the set. The 

display is activated.

Hold down the 

 

‹

/MUTE (11) button to switch the unit 

off.

 

High volumes can permanently damage your hearing.

Set a moderate volume.

 

►

Turn the multi control knob (21) to set the volume.

 

‹

Press the 

 

‹

/MUTE (11) button to switch the unit to 

mute. The 

MUTE indicator appears on the display.

Press the 

 

‹

/MUTE (11) button again to deactivate the 

function.

Press the multi control knob (21).The current volume is 

 

‹

displayed. Press again to cycle through the next setting 

options.

The following settings are possible:

VOL  -  volume (0 to 100)

BAS  -  bass (-10 to +10)

TRB  -  treble (-10 to +10)

BAL  -  Balance (sound distribution between left and 

right speakers) (10L to 10R)

FAD  -  Fader (sound distribution between rear and front 

speakers) (10F to 10R)

Turn the multi control knob to change the displayed 

 

‹

setting.