AEG AR 4020 400400 사용자 설명서

70

Press 

 

‹

 (15) or   (16) to step through the FM fre-

quency band in steps of 0.05 MHz and 9 kHz for AM 

until the desired frequency is displayed.

After two seconds idling the unit returns to auto search. 

The display shows 

AUTO.

For each frequency band 6 station presets are available.

Press and hold the desired numeric button (4) approx. 

 

‹

2 seconds to save the current station. A beep can be 

heard after successful storage (except setting to 

OFF).

Press 

 

‹

BAND/LOU/ENT (2) to select the desired frequen-

cy band.

Press one of the numeric buttons (4) to access the 

 

‹

respective station.

Press 

 

‹

BAND/LOU/ENT (2) to select the desired frequen-

cy band.

Press and hold 

 

‹

AS/PS (22). SEARCH is displayed. The 

unit starts automatic search. With search, the first 18 

stations are checked. The respective preset flashes.

Press one of the numeric buttons (4) to access the 

 

‹

respective station. 

Press 

 

‹

AS/PS (22). All stations are briefly played in 

sequence.

Press 

 

‹

AS/PS (22). When the desired station comes up. 

This station stays tuned into.

AF is an RDS (Radio Data System) function and is only 

available for FM stations. The unit searches in the back-

ground the best frequency for the selected station.

Briefly hold down the 

 

‹

PTY/AF (17) button to switch 

this function on or off.

AF is displayed: Function is activated and RDS information 

is received.

AF flashes: No RDS information is received.

AF is not displayed: Function is deactivated.

Some FM stations transmit besides the station name also 

the program type.

You can search for stations with certain genres.

Press the button 

 

‹

PTY/AF (17).

Select the desired PTY identification by turning the 

 

‹

multi- ‹controller (21). The PTY genre is displayed.

Such program types may be for example:

SPORT

NEWS

POP M

CLASSICS

After selecting the PTY genre the unit searches for the 

respective stations and stops when a station is found. If 

no station with the respective PTY genre is found, 

NO PTY 

is displayed.

The PTY function is deactivated if the selected PTY genre 

is no lon-ger received. Or press the button 

PTY/AF (17) to 

end the function early.

Hold down the 

 

‹

EQ/TA (19) button to switch this mode 

on or off. 

TA is displayed with activated mode. 

In the TA mode, switching from any other operation 

mode is done immediately to a radio station sending 

traffic announcements at that time. The volume level 

is set to 43 for receiving traffic announcements.  

TRAFFIC is shown on the display.

Briefly hold down the 

 

‹

EQ/TA (19) button during 

playback of traffic radio to interrupt the TA function 

without switching the function off.

The unit is equipped with anti-shock function. This func-

tion compensates for bumps on uneven streets and ensure 

uninterrupted playback. 

Press the release button (1) to flip down the control 

 

‹

panel.

Insert the CD with the label up into the CD drive Flip 

 

‹

the control panel back up. The display shows 

PLAY. CD playback starts.

To eject the CD, press the 

 

‹

 (23) button when the 

control panel is flipped down. The CD is ejected. After 

flipping up the control panel again, the unit switches 

to radio mode.

Remove the CD from the drive. The CD will be retracted 

 

‹

again after 15 seconds if it is not removed from the 

slot; in this case playback does not start automatically.

 

Please note: 

 

►

A large variety of burner and compression software 

is on the market; there are differences in quality 

between CDs and home-burnt CDs.  

Furthermore, the music industry does not have fixed 

standards (copy protection). 

For this reason it can happen that in exceptional 

cases play-back problems for CDs and MP3/WMA CDs 

occur. This is 

not a malfunction of this unit. 

Repeatedly press 

 

‹

MODE (20) until CDP PLAY is dis-

played.