AEG AR 4020 400400 사용자 설명서

72

 

The large variety of memory cards on the market 

 

►

prevent us from guaranteeing full compatibility with 

all memory cards. For this reason it can happen that 

in exceptional cases playback problems for memory 

cards occur. This is 

not a malfunction of this unit.

Remove the control panel (see Page 68).

 

‹

Insert a memory card with the label pointing up into 

 

‹

the card slot until it locks with a click. Insert the con-

trol panel again (see Page 68). The display shows 

PLAY. Playback of MP3 or WMA tracks on the memory 

cards starts automatically.

Press the end of the memory card to remove it. 

 

‹

Operation for file playback from external media device 

 

‹

as well as the search function is similar to MP3 CDs.

Repeatedly press 

 

‹

MODE (20) to select card mode.

 

Ensure that no moisture penetrates the unit, as this 

 

►

can cause irreparable damage.

Clean the unit only with a slightly dampened cloth.

 

‹

This chapter describes important instructions for trouble-

shooting. Please observe all instructions to avoid risks and 

damage.

 

Please observe the following safety instructions to avoid 

risks and damage:

Electrical repairs must only be executed by specialized 

 

►

staff being trained by the manufacturer. Improper 

repairs can cause significant danger for the user and 

damage to the unit.

Unit cannot 

be turned 

on.

The car ignition 

switch is not on.

If the power supply 

is properly con-

nected to the car 

accessory terminal, 

switch the ignition 

key to “ACC”.

No sound

The volume is set to 

minimum.

Increase the vol-

ume.

Wiring is improper.

Check the wiring.

Disc cannot 

be loaded or 

is ejected.

Presence of disc inside 

the player.

Remove the disc in 

the player, and then 

load a new one.

Disc inserted in 

reverse direction.

Insert the compact 

disc with the label 

facing up.

The disc is extremely 

dirty or defective.

Clean the disc or try 

to play a new one.

CD format is not sup-

ported.

Insert a different 

CD.

Mistake with home-

burnt CD.

Check your CD in a 

different player.

Temperature inside 

the car is too high.

Cool off or wait 

until the ambient 

temperature returns 

to normal.

Condensation on the 

laser.

Turn the unit off 

for several hours 

until the moisture is 

evaporated.

CD skips.

Installation angle over 

30°.

Decrease installa-

tion angle to less 

than 30°.

CD dirty or damaged. Clean the CD or 

play different CD.

The opera-

tion keys do 

not work.

The built-in micro-

computer is not 

operating properly 

due to noise.

Press RESET (25).

The front panel is not 

correctly installed.

Remove the front 

panel, press RESET 

button and install 

again.

The radio 

does not 

work or no 

auto scan.

The antenna cable is 

not connected.

Insert the antenna 

cable firmly.

The signals are too 

weak.

Select a station 

manually.

Station 

memory does 

not work.

Terminal 4 of ISO 

connector A (con-

tinuous positive) not 

properly connected.

Check the cabling. 

Observe chapter 

“Connections”.