Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER 데이터 시트

제품 코드

DLPLIGHTCRAFTER

Connecting to a PC

www.ti.com

2.2.1 Installing the RNDIS Driver on Windows XP

The first time DLP LightCrafter connects to Windows XP, a system pop-up window shows the new
"RNDIS/Ethernet Gadget" hardware device. Windows XP Service Pack 2 or greater includes the RNDIS
drivers, so these drivers should be found by the OS. Follow these steps to install the "RNDIS/Ethernet
Gadget" driver to enable USB communication with the EVM:

1. When the "Found New Hardware" dialog appears, as shown in

Figure 2-3

and

Figure 2-4

, allow

Windows Update to search for the software.

2. Select “Install the software automatically (Recommended)” and click "Next." See

Figure 2-4

•

The computer must have an active internet connection to download the driver.

Figure 2-3. Windows XP Found New Hardware Popup

Figure 2-4. Windows XP Found New Hardware Wizard

2.2.2 Installing the RNDIS Driver on Windows 7

The first time DLP LightCrafter is connected on Windows 7 systems a pop-up window appears stating that
a new hardware device called a "RNDIS/Ethernet Gadget" was found. Follow these steps to install the
"RNDIS/Ethernet Gadget" driver to enable USB communication with the EVM:

1. The "Driver Software Installation" dialog should appear. Windows 7 will try to automatically download

the driver and fail. A message indicating that the “device driver software was not successfully installed"
is displayed. See

Figure 2-5

Operating the DLP LightCrafter

DLPU006C – January 2012 – Revised December 2013

Submit Documentation Feedback