Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER 데이터 시트
제품 코드
DLPLIGHTCRAFTER
Triggering External Peripherals (Camera and So Forth)
Figure 2-30. DLP LightCrafter GUI Image Orientation Settings
2.6
Triggering External Peripherals (Camera and So Forth)
The DLP LightCrafter features a trigger output on connecter J7 to allow cameras and other peripherals to
be in sync with the EVM. The trigger output is an open drain type with a 10 k
be in sync with the EVM. The trigger output is an open drain type with a 10 k
Ω internal pull-up resistor.
This works well with cameras accepting a standard TTL level trigger input. Some cameras with global
trigger capability require a minor hardware change on the DLP LightCrafter system board in order to
function correctly. For more information, read Using the DLP® LightCrafter™ to Trigger CCD Cameras
from The Image Source®, TI literature number
trigger capability require a minor hardware change on the DLP LightCrafter system board in order to
function correctly. For more information, read Using the DLP® LightCrafter™ to Trigger CCD Cameras
from The Image Source®, TI literature number
.
shows the "Output Trigger Settings"
in the GUI.
32
Operating the DLP LightCrafter
DLPU006C – January 2012 – Revised December 2013
Copyright © 2012–2013, Texas Instruments Incorporated