Texas Instruments DRV8313 Evaluation Module DRV8313EVM DRV8313EVM 데이터 시트
제품 코드
DRV8313EVM
INSTALLING FTDI DRIVERS
DRV8313EVM to enable motor operation.
2
INSTALLING FTDI DRIVERS
Download the DRV8313EVM software and development package from the TI Web site:
. Find and unzip Step 1 - INSTALL_USB_Driver into a separate folder.
See instructions on how to install the FTDI USB driver on a Windows
®
based computer in the
FTDI_Drivers_Install_Readme.pdf file.
3
INSTALLING Windows
®
APPLICATION
The available download also includes a file named DRV8313EVM_Windows7_Application.zip. Copy the
contents of this folder to any desired folder on your computer. This causes the Settings.ini file to be written
to the desired folder on software exit. This action cannot occur if the application is run within the zip file.
Make sure to first unzip all the contents of the zip file into a folder on your computer. After you unzip the
contents, your folder should look like the following.
contents of this folder to any desired folder on your computer. This causes the Settings.ini file to be written
to the desired folder on software exit. This action cannot occur if the application is run within the zip file.
Make sure to first unzip all the contents of the zip file into a folder on your computer. After you unzip the
contents, your folder should look like the following.
Figure 4. DRV8313EVM_Windows7_Application.zip Contents
Before installing the application, make sure you have the FTDI drivers installed and your hardware
connections are in place.
connections are in place.
Double click on the icon ‘DRV8313EVM’ of ‘setup’ to run the application. The first time that you run this
application you will see the following message.
application you will see the following message.
6
DRV8313EVM User’s Guide
SLVU815 – November 2012
Copyright © 2012, Texas Instruments Incorporated