Texas Instruments PCM4202 Evaluation Module PCM4202EVM PCM4202EVM 데이터 시트

제품 코드

PCM4202EVM

www.ti.com

Getting Started

2.1

Electrostatic Discharge Warning

2.2

EVM Package Contents

2.3

Absolute Operating Conditions

Getting Started

This section provides information regarding handling and unpacking the PCM4202EVM, as well as

absolute operating conditions for the unit.

CAUTION

Failure to observe proper ESD handling precautions may result in damage to
EVM components.

Many of the components on the PCM4202EVM are susceptible to damage by electrostatic

discharge (ESD). Customers are advised to observe proper ESD handling procedure when

unpacking and handling the EVM, including the use of a grounded wrist strap at an approved ESD

workstation. Failure to observe ESD handling procedures may result in damage to EVM

components.

Upon opening the PCM4202EVM package, please check to make sure that the following items are

included:
· One PCM4202EVM
· One printed copy of the PCM4202 product datasheet
· One printed copy of this PCM4202EVM User's Guide
If any of these items are missing, please contact the Texas Instruments Product Information Center

nearest you to inquire about replacements.

CAUTION

Exceeding the absolute operating conditions may result in damage to the
evaluation module and/or the equipment connected to it.

The user should be aware of the absolute operating conditions for the PCM4202EVM.

Table 1

summarizes the critical data points.

SBAU103–August 2004

PCM4202EVM User's Guide