Texas Instruments XIO2213B Evaluation Module / Reference Design XIO2213BEVM XIO2213BEVM 데이터 시트
제품 코드
XIO2213BEVM
SCPS210F – OCTOBER 2008 – REVISED MAY 2013
6.4
GPIO Data Register
This register reads the state of the input-mode GPIO terminals and changes the state of the output-mode
GPIO terminals. Writing to a bit that is in input mode or is enabled for a secondary function is ignored. The
secondary functions share GPIO4 (SCL) and GPIO5 (SDA). The default value at power up depends on
the state of the GPIO terminals as they default to general-purpose inputs. This register is an alias of the
GPIO data register in the classic PCI configuration space (offset B6h, see
GPIO terminals. Writing to a bit that is in input mode or is enabled for a secondary function is ignored. The
secondary functions share GPIO4 (SCL) and GPIO5 (SDA). The default value at power up depends on
the state of the GPIO terminals as they default to general-purpose inputs. This register is an alias of the
GPIO data register in the classic PCI configuration space (offset B6h, see
). See
for
a complete description of the register contents.
Device control memory window register offset:
42h
Register type:
Read only, Read/Write
Default value:
00XXh
BIT NUMBER
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
RESET STATE
0
0
0
0
0
0
0
0
x
x
x
x
x
x
x
x
Table 6-3. GPIO Data Register Description
BIT
FIELD NAME
ACCESS
DESCRIPTION
15:8
RSVD
R
Reserved
7
(1)
GPIO7_Data
RW
GPIO 7 data. This bit reads the state of GPIO7 when in input mode or changes the state
of GPIO7 when in output mode.
of GPIO7 when in output mode.
6
(1)
GPIO6_Data
RW
GPIO 6 data. This bit reads the state of GPIO6 when in input mode or changes the state
of GPIO6 when in output mode.
of GPIO6 when in output mode.
5
(1)
GPIO5_Data
RW
GPIO 5 data. This bit reads the state of GPIO5 when in input mode or changes the state
of GPIO5 when in output mode.
of GPIO5 when in output mode.
4
(1)
GPIO4_Data
RW
GPIO 4 data. This bit reads the state of GPIO4 when in input mode or changes the state
of GPIO4 when in output mode.
of GPIO4 when in output mode.
3
(1)
GPIO3_Data
RW
GPIO 3 data. This bit reads the state of GPIO3 when in input mode or changes the state
of GPIO3 when in output mode.
of GPIO3 when in output mode.
2
(1)
GPIO2_Data
RW
GPIO 2 data. This bit reads the state of GPIO2 when in input mode or changes the state
of GPIO2 when in output mode.
of GPIO2 when in output mode.
1
(1)
GPIO1_Data
RW
GPIO 1 data. This bit reads the state of GPIO1 when in input mode or changes the state
of GPIO1 when in output mode.
of GPIO1 when in output mode.
0
(1)
GPIO0_Data
RW
GPIO 0 data. This bit reads the state of GPIO0 when in input mode or changes the state
of GPIO0 when in output mode.
of GPIO0 when in output mode.
(1)
These bits shall only be reset by a fundamental reset (FRST). FRST is asserted (low) whenever PERST or GRST is asserted.
Copyright © 2008–2013, Texas Instruments Incorporated
Memory-Mapped TI Proprietary Register Space
111
Product Folder Links: