Texas Instruments Evaluation Module for TPS23851 High Power, Wide Voltage Range Quad Port Ethernet PSE Manager TPS23851E TPS23851EVM-001 데이터 시트

제품 코드

TPS23851EVM-001

GUI Setup

www.ti.com

4.3

USB Cable

Turn on the power supply first and then plug the USB connector. Green LED, D1 should turn on.

Figure 2

shows the interconnect boards with power supply, USB, and POE load attachment.

Figure 2. Components and Interconnects

GUI Setup

1. Create a folder for the GUI and the National Instrument's download.
2. Go to National Instruments website and download and install the LabView Runtime Engine to the

new folder. Follow directions on screen. The download is free but you may be asked for a registration.
Use this link to get the runtime engine:

http://joule.ni.com/nidu/cds/view/p/id/1101/lang/en

. Download

LVRTE86std.exe and install.

3. Copy the attached file,

TPS23851 GUI Software

, to the new folder on the PC and unzip. Go to folder

TPS23851GUI and Double-click TPS23851.exe.

4. The GUI should start. Power the EVM and plug in a USB cable from computer to EVM. The green LED

at D1 will turn on.

Using the TPS23851EVM-001

SLUU492 – February 2011

Submit Documentation Feedback