Texas Instruments Evaluation Module for TPS23851 High Power, Wide Voltage Range Quad Port Ethernet PSE Manager TPS23851E TPS23851EVM-001 데이터 시트
제품 코드
TPS23851EVM-001
GUI Getting Started
www.ti.com
Plug in a valid PD load to any of the four left-side ports and the load will be powered. The connectors are
ordered Port 4 thru Port 1 where Port 4 is the leftmost connector. The right-side 4 connectors are not
operational but are included for expansion. Left or right is determined by facing the port connectors plug
input side.
ordered Port 4 thru Port 1 where Port 4 is the leftmost connector. The right-side 4 connectors are not
operational but are included for expansion. Left or right is determined by facing the port connectors plug
input side.
After an operator action in the GUI, the resultant event may be checked in other GUI windows tabs such
as Events or Interrupts. Interrupt/Event Tabs are shown in the left half of
as Events or Interrupts. Interrupt/Event Tabs are shown in the left half of
. Follow the tabs to
get to the proper window to check results.
RUN and STOP are in the upper left corner of the GUI screen. The GUI is running when the arrow is
black filled.
black filled.
Reset is not active from the GUI Button. Reset can be done through the on-board push button switch.
Auto is grounded so all ports reset or power-up OFF.
Auto is grounded so all ports reset or power-up OFF.
Figure 4. GUI Buttons
6
Using the TPS23851EVM-001
SLUU492 – February 2011
© 2011, Texas Instruments Incorporated