Texas Instruments IC MCU 16B MSP430F2111IRGET VQFN-24 TID MSP430F2111IRGET 데이터 시트
제품 코드
MSP430F2111IRGET
MSP430F21x1
SLAS439F
–
SEPTEMBER 2004
–
REVISED AUGUST 2011
Operating Modes
The MSP430 microcontrollers have one active mode and five software-selectable low-power modes of operation.
An interrupt event can wake up the device from any of the five low-power modes, service the request, and
restore back to the low-power mode on return from the interrupt program.
An interrupt event can wake up the device from any of the five low-power modes, service the request, and
restore back to the low-power mode on return from the interrupt program.
The following six operating modes can be configured by software:
•
Active mode (AM)
–
All clocks are active.
•
Low-power mode 0 (LPM0)
–
CPU is disabled.
–
ACLK and SMCLK remain active. MCLK is disabled.
•
Low-power mode 1 (LPM1)
–
CPU is disabled ACLK and SMCLK remain active. MCLK is disabled.
–
DCO dc-generator is disabled if DCO not used in active mode.
•
Low-power mode 2 (LPM2)
–
CPU is disabled.
–
MCLK and SMCLK are disabled.
–
DCO dc-generator remains enabled.
–
ACLK remains active.
•
Low-power mode 3 (LPM3)
–
CPU is disabled.
–
MCLK and SMCLK are disabled.
–
DCO dc-generator is disabled.
–
ACLK remains active.
•
Low-power mode 4 (LPM4)
–
CPU is disabled.
–
ACLK is disabled.
–
MCLK and SMCLK are disabled.
–
DCO dc-generator is disabled.
–
Crystal oscillator is stopped.
Copyright
©
2004
–
2011, Texas Instruments Incorporated
7