Microchip Technology AC244045 데이터 시트
Required Debug Headers
2006-2012 Microchip Technology Inc.
DS51292U-page 31
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 12:
DIMENSIONS - AC244028
Dimensions are in inches
Top
Side
0.062 Typical
0.165 Typical
0.165 Typical
0.380 Typical
2.370
0.280
1.860
1.945
1.400
0.855
20-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
28-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
14-Pin Target Pin 1 Located
on Bottom side of Header
on Bottom side of Header
Optional SPI trace
2-Pin right angle header
to be installed here.
(Digi-Key P/N A32702-02-ND)
2-Pin right angle header
to be installed here.
(Digi-Key P/N A32702-02-ND)
6-pin Modular Connector
See “Debug Header Connec-
tions” for details.
tions” for details.
ICE
Device
Device