Ansmann Powerline 5 LCD 5707083 데이터 시트
제품 코드
5707083
to guarantee perfect function of the unit and avoid over-heating • Do not plug in the charger if there are any signs of
damage to the housing, cables or plugs • Do not open or reconstruct the charger or any adaptors • In the case of a defect,
please return to an authorized service centre • Keep out of reach of children • Disconnect the device from the mains after
use • To clean the device please disconnect from the mains and use only a dry cloth.
damage to the housing, cables or plugs • Do not open or reconstruct the charger or any adaptors • In the case of a defect,
please return to an authorized service centre • Keep out of reach of children • Disconnect the device from the mains after
use • To clean the device please disconnect from the mains and use only a dry cloth.
OPERATION:
1a. Plug in the charger to the mains: Connect the DC output plug with the DC input socket of the charger. Connect the
input plug from the AC adaptor into the mains socket.
1b. Plug in the charger into the vehicle: Connect the DC output plug with the DC input socket of the charger. Connect
the Input plug from the DC adaptor to the vehicle cigarette lighter socket
2a. Charging of cylindrical cells: The charger starts automatically when one or more cells are inserted into the
charging slots. Insertion of the cylindrical cells: Pull back the contact bridge (5) and insert the cells to the bottom of the
charging slot. Always connect the cells with the right direction of the polarity (according to the symbols in the charging
slots). The cells do not have to be inserted simultaneously as the charging processes are separated from each other. When
charging is finished, the cells are provided with trickle charging, so that the cells can remain in the charger until use.
Discharging: For discharging the cylindrical cells press the discharge button “PRESS” (4) for approx. 3 seconds. After
discharge of inserted cells the charger automatically switches back to charging.
It is possible to discharge and charge different cells at the same time. Therefore please insert cells into free slots after
the discharging of batteries has started.
2b. Charging of 9V block: Connect the 9V block with the right polarity to the charging slots. The charging indicator
(2) for the 9V block will light up, if the battery is inserted correctly. Please only charge discharged batteries. To avoid the
9V block against overcharging please take a look to the charging times in the table (6). Please remove the 9V block from
the charging slot after the correct charging time to protect the battery from overcharging. It is not possible to discharge
the 9V block with the discharge button.
1a. Plug in the charger to the mains: Connect the DC output plug with the DC input socket of the charger. Connect the
input plug from the AC adaptor into the mains socket.
1b. Plug in the charger into the vehicle: Connect the DC output plug with the DC input socket of the charger. Connect
the Input plug from the DC adaptor to the vehicle cigarette lighter socket
2a. Charging of cylindrical cells: The charger starts automatically when one or more cells are inserted into the
charging slots. Insertion of the cylindrical cells: Pull back the contact bridge (5) and insert the cells to the bottom of the
charging slot. Always connect the cells with the right direction of the polarity (according to the symbols in the charging
slots). The cells do not have to be inserted simultaneously as the charging processes are separated from each other. When
charging is finished, the cells are provided with trickle charging, so that the cells can remain in the charger until use.
Discharging: For discharging the cylindrical cells press the discharge button “PRESS” (4) for approx. 3 seconds. After
discharge of inserted cells the charger automatically switches back to charging.
It is possible to discharge and charge different cells at the same time. Therefore please insert cells into free slots after
the discharging of batteries has started.
2b. Charging of 9V block: Connect the 9V block with the right polarity to the charging slots. The charging indicator
(2) for the 9V block will light up, if the battery is inserted correctly. Please only charge discharged batteries. To avoid the
9V block against overcharging please take a look to the charging times in the table (6). Please remove the 9V block from
the charging slot after the correct charging time to protect the battery from overcharging. It is not possible to discharge
the 9V block with the discharge button.
MAINTENANCE AND CLEANING:
To clean the charger, disconnect it from the power adaptor. To ensure correct function of the charger keep the charging
contacts free from dust and dirt. Please only use a dry cloth.
To clean the charger, disconnect it from the power adaptor. To ensure correct function of the charger keep the charging
contacts free from dust and dirt. Please only use a dry cloth.
ENVIRONMENT:
Rechargeable batteries are not to be disposed of in domestic waste. Used batteries should be turned into a battery
recycling collection depot. Check with your local municipal office.
Rechargeable batteries are not to be disposed of in domestic waste. Used batteries should be turned into a battery
recycling collection depot. Check with your local municipal office.
TECHNICAL DATA:
Charging current: Micro AAA: 500 mA; Mignon AA: 1000 mA; Baby C: 1000 mA; Mono D:1000 mA; 9V: 15 mA
Charging current: Micro AAA: 500 mA; Mignon AA: 1000 mA; Baby C: 1000 mA; Mono D:1000 mA; 9V: 15 mA