Insys WLAN Bridge 11-02-01-06-03.001 사용자 설명서
제품 코드
11-02-01-06-03.001
Technical Data
7
Layout of the terminals on the cover bottom
Terminal Labeling
Description
11
OUT 1-NC
Output 1 – normally closed contact
12
OUT 1
Output 1, COM
13
OUT 1-NO
Output 1 – normally open contact
14
OUT 2-NC
Output 2 – normally closed contact
15
OUT 2
Output 2, COM
16
OUT 2_NO
Output 2 – normally open contact
3.4 Power
Supply
Power supply:
10…60 V DC, 5% ripple
In addition, a second power supply range 50…80 V DC is
possible. This, however, must be ordered separately, if
required.
possible. This, however, must be ordered separately, if
required.
Power input:
Approx. 3 W (during connection)
Current consumption:
Current consumption at
10VDC approximately
10VDC approximately
280mA
Current consumption at
24VDC approximately
24VDC approximately
120mA
Current consumption at
36VDC approximately
36VDC approximately
80mA
3.5 Interfaces
3.5.1 Serial Interface
Attention!
This interface is only active for the INSYS WLAN serial.
View of the 9-pin D-SUB jack
version 1.01 / 10.04