Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 사용자 설명서
제품 코드
0560 0882
5 First steps
19
Mounting Softcase
The Softcase combines the functions of instrument protection, Sun
Shield and carrying function (strap).
1.
The Softcase combines the functions of instrument protection, Sun
Shield and carrying function (strap).
1.
Set the Softcase on the imager from above (1) and pull both
sides of the Softcase down around the display (2).
2.
Guide Velcro strip through the two plates (3) and close (4).
Switch the imager on/off
1.
1.
Remove protection cap from the lens.
2.
Press
[
]
.
- The start screen appears on the display. The type designation
of the imager and the firmware version are shown.
- The measurement view is opened after the warm-up period.
- The imager performs an automatic zeroing approx. every 60
- The imager performs an automatic zeroing approx. every 60
sec. This can be recognized by means of a "click". The image is
frozen briefly when this occurs.
frozen briefly when this occurs.
> To
switch
off:
Press
[
]
.
- The display goes out and the imager is switched off.