Redpitaya RED PITAYA, OPEN SOURCE LAB RED Pitaya V 1.1 데이터 시트
제품 코드
RED Pitaya V 1.1
○ Output coupling: DC
○ Load impedance: 50 Ω (J)
○ Output slew rate limit: 200 V/us
○ Connector type: SMA (U)
○ DC offset error: < 5% FS (G)
○ Gain error: < 5% (G)
○ Full scale power: > 9 dBm (L)
○ Harmonics: typical performance: (at 8 dBm)
○ Load impedance: 50 Ω (J)
○ Output slew rate limit: 200 V/us
○ Connector type: SMA (U)
○ DC offset error: < 5% FS (G)
○ Gain error: < 5% (G)
○ Full scale power: > 9 dBm (L)
○ Harmonics: typical performance: (at 8 dBm)
■ 51 dBc @ 1 MHz
■ 49 dBc @ 10 MHz
■ 48 dBc @ 20 MHz
■ 53 dBc @ 45 MHz
■ 49 dBc @ 10 MHz
■ 48 dBc @ 20 MHz
■ 53 dBc @ 45 MHz
● Auxiliary analog input channels:
○ Number of channels: 4
○ Nominal sampling rate: 100 ksps (H)
○ ADC resolution 12 bits
○ Connector: dedicated pins on IDC connector E2 (pins 13,14,15,16)
○ Input voltage range: 0 to +3.5 V
○ Input coupling: DC
○
○ Nominal sampling rate: 100 ksps (H)
○ ADC resolution 12 bits
○ Connector: dedicated pins on IDC connector E2 (pins 13,14,15,16)
○ Input voltage range: 0 to +3.5 V
○ Input coupling: DC
○
● Auxiliary analog output channels
○ Number of channels: 4
○ Output type: Low pass filtered PWM (I)
○ PWM time resolution: 4ns (1/250 MHz)
○ Connector: dedicated pins on IDC connector E2 (pins 17,18,19,20)
○ Output voltage range: 0 to +1.8 V
○ Output coupling: DC
○ Output type: Low pass filtered PWM (I)
○ PWM time resolution: 4ns (1/250 MHz)
○ Connector: dedicated pins on IDC connector E2 (pins 17,18,19,20)
○ Output voltage range: 0 to +1.8 V
○ Output coupling: DC
● General purpose digital input/output channels: (N)
○ Number of digital input/output pins: 16
○ Voltage level: 3.3 V
○ Direction: configurable
○ Location: IDC connector E1 (pins 324 )
○ Voltage level: 3.3 V
○ Direction: configurable
○ Location: IDC connector E1 (pins 324 )
● Extension:
○ Connector: 2 x 26 pins IDC (M)
○ Power supply:
○ Power supply:
■ Available voltages: +5V, +3.3V, 3.3V
■ Current limitations: 500 mA for +5V and +3.3V (to be shared between
■ Current limitations: 500 mA for +5V and +3.3V (to be shared between
extension module and USB devices), 50 mA for 3.3V supply.
● Serial connectivity:
○ Connector type: 2x “SATA type” connector
○ Two differential pairs per connector enabling up to 500 Mbps
○ Two differential pairs per connector enabling up to 500 Mbps
● CPU / FPGA: Xilinx Zynq 7010 SoC