Testo ComSoft 3 0554 0830 데이터 시트

35

34

Last measurement
If data is lost, you can use this method to restore data from
the last measurement. The data comes from a backup file,
which is only updated every 30 seconds. In some cases,
the last measurement data could be missing.

Consult the Data logger Instruction manual to find out how
to set up a connection between data logger and software
and how to program the data logger.

Place a logger, which has values saved, in the desk-top
holder which is connected to an interface.

The connection is set up by clicking twice on instrument in
the archive. The log saved in the instrument appears under
instrument.

A context menu will appear by clicking right on the log icon.
Select “Reading out sections ...”.

The “Reading out sections” window opens. Select the value
range which you want to show: “Date/Time”, “Lines” or
“From time mark”. The time mark is an intermediate mark
which can be set in the data logger (refer to the Data logger
Instruction manual).

The selected values are shown.

Select “Copy” in the toolbar.

Open Microsoft Excel and select “Edit” > “Paste”.

The readings are accepted into the Excel table.