Uhlenbrock 63240 Digital booster Power 4 63240 데이터 시트
제품 코드
63240
27
7. RailCom
The booster is prepared for RailCom. It makes the “RailCom CutOut” available if it
receives a DCC input signal and the DIP switch 4 is switched on.
receives a DCC input signal and the DIP switch 4 is switched on.
8. Error Indication
The Power 4 reports errors by different flashing signals of the red and green LEDs.
green LED on – red LED off
“go”-key pressed
Track Power is switched on (normal operating state).
“go”-key pressed
Track Power is switched on (normal operating state).
red LED on – green LED off
“stop”-key pressed
Track Power is switched off by the center.
“stop”-key pressed
Track Power is switched off by the center.
green LED off – red LED blinking
Short circuit on the Track.
Short circuit on the Track.
LEDs blink alternately 1 x rot - 1 x green
Overheating, Track power is switched off.
Overheating, Track power is switched off.
LEDs blink alternately 1 x rot - 2 x green
No Input signal.
No Input signal.