Sygonix Surveillance Camera 20815Q 20815Q 사용자 설명서
제품 코드
20815Q
29
j) Setting Function “PRIVACY”
You can cover up to 8 image areas with a rectangle (8 different colours can be selected), so that
they are invisible.
This is done to protect sensitive areas from monitoring or recording, e.g. the workplace of an em-
ployee or the display on a screen.
First switch on the function. If you push the button only briefl y as usual, you can perform the fol-
lowing settings:
“AREA SEL”
they are invisible.
This is done to protect sensitive areas from monitoring or recording, e.g. the workplace of an em-
ployee or the display on a screen.
First switch on the function. If you push the button only briefl y as usual, you can perform the fol-
lowing settings:
“AREA SEL”
Select one of the 8 image areas (1/8......8/8).
The sliders „TOP“, „BOTTOM“, „LEFT“ and „RIGHT“ can be used to draw a rec-
tangle.
tangle.
“COLOR”
Set the colour of the rectangle; 8 different colours are available. Observe that
the colours are displayed as grey tones in black/white display of the camera
image (e.g. at night)!
the colours are displayed as grey tones in black/white display of the camera
image (e.g. at night)!
“TRANSP”
Set the rectangle transparency here. The rectangle is not transparent at a
setting of „1.00“.
setting of „1.00“.
“MOSAIC”
If „TRANSP“ is set to a value below „1.00“, the image may also be displayed
falsifi edly if you select „ON“.
falsifi edly if you select „ON“.
The image area selected for „AREA SEL“ is applied with a mosaic pattern. This
still shows when something moves in the image area, but no details are vis-
ible.
still shows when something moves in the image area, but no details are vis-
ible.
k) Setting Function “DAY/NIGHT”
The camera switches automatically between colour and black/white depending on ambience
brightness.
“AUTO”
brightness.
“AUTO”
The camera switches automatically between colour and black/white depend-
ing on ambience brightness in the basic setting.
ing on ambience brightness in the basic setting.
Press the button „MENU“ to show a submenu:
„BURST“: The setting „ON“ activates the colour carrier signal in black/white
display. This means that, e.g., the menu items are displayed in colour the
setup menu even in black/white display.
display. This means that, e.g., the menu items are displayed in colour the
setup menu even in black/white display.
The image quality may improve by using black/white on colour screens.
“DELAY CNT”: Delay value for switching
„DAY->NIGHT“: Brightness value as of which the switch from colour to black/
white mode is performed
white mode is performed
„NIGHT->DAY“: Brightness value as of which the switch from black/white to
colour mode is performed
colour mode is performed