Sygonix 43192V 사용자 설명서
22
six, eight, nine, and sixteen windows (the number of windows depends on the model of the
DVR being used).
DVR being used).
AUTO SEQUENCE: Click “AUTO SEQUENCE” on the toolbar to enable auto-
sequencing; this will display the channels with images in sequence: channel 1-channel
2-channel 3-channel 4-channel 1…… (for a 4-CH DVR) / channel 1-channel 2-channel
3-channel 4-channel 5-channel 6-channel 7-channel 8-channel 1…… (for an 8-CH DVR)
/channel 1-channel 2-channel 3-channel 4-……-channel 14-channel 15-channel 16-channel
1…… (for a 16-CH DVR). Channels without images will not be displayed. To interrupt auto-
sequencing, press any button or click the mouse while in auto-sequence mode.
2-channel 3-channel 4-channel 1…… (for a 4-CH DVR) / channel 1-channel 2-channel
3-channel 4-channel 5-channel 6-channel 7-channel 8-channel 1…… (for an 8-CH DVR)
/channel 1-channel 2-channel 3-channel 4-……-channel 14-channel 15-channel 16-channel
1…… (for a 16-CH DVR). Channels without images will not be displayed. To interrupt auto-
sequencing, press any button or click the mouse while in auto-sequence mode.
EZOOM: Click “EZOOM” to enter zoom mode, and then left-click and drag the cursor to
select the area to be magnified. Right-click to exit zoom mode.
PIP 1*1: This feature displays the video from one channel in a small inset window, while
another channel is displayed in full-screen view.
PIP 1*2: This feature displays two channels in small, inset windows, while another channel
is displayed in full-screen view.
VGA/BNC SWITCH (video output switch): Press the “ ”or the “
” button or
numerical “
” button ten times when the toolbar is not visible or click “
VGA/BNC
SWITCH” on the toolbar, and this will switch the main menu between CVBS video output and
VGA video output.
See the following subsections for a detailed description of each of these functionalities.
VGA video output.
See the following subsections for a detailed description of each of these functionalities.
4.2 Tool Bar Menu Options
4.2.1 System Configuration
After pressing this button, a screen for configuring all system settings will appear. From
this screen, system and network settings, and settings for recording, video playback, alarms,
and PTZ (if the device has this functionality) can be adjusted. Refer to
and PTZ (if the device has this functionality) can be adjusted. Refer to
Section 5. DVR
for a
detailed description of these settings.
Note:
In order to for changes to sub-menu settings to take effect, it is necessary to press
“
”. Changes to the sub-menu settings will not be saved if you do not press “
” and
exit the sub-menu immediately afterward. A special feature of this DVR is that an explanation
of each menu item will be displayed automatically when the cursor is moved over it.
of each menu item will be displayed automatically when the cursor is moved over it.
4.2.2 Manual Recording
There are three ways of recording live video/audio feed from your cameras: manual
recording, scheduled recording, and continuous recording.
If scheduled recording is in conflict with manual recording, the manual recording will be
processed first until stopped.
If scheduled recording is in conflict with manual recording, the manual recording will be
processed first until stopped.
For a detailed description of scheduled recording, see
Section 5.3.8 Recording Modes.