Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 데이터 시트
![Siemens](https://files.manualsbrain.com/attachments/fea10bc852adcb1f4f76708d5daebca542e532b9/common/fit/150/50/c53f5738b57089fc3d6c279e23db7450685a19c9616727fc1f659077967b/brand_logo.png)
제품 코드
6ED1057-3BA00-0AA8
User interface
2.8 Menu bar
LOGO!Soft Comfort Online Help
96
Operating Instructions, 06/2014
● Momentary pushbutton (break)
● Frequency
You have only one option for the analog inputs:
● Analog
● Frequency
You have only one option for the analog inputs:
● Analog
Name column
Switch
A switch latches when actuated and is released by actuating it once again.
Momentary pushbutton
A momentary pushbutton is only active while it is held down. The contact opens as soon as
you release the button.
You can determine a make or break action for the pushbuttons.
You can determine a make or break action for the pushbuttons.
Frequency
You can preset or change the frequency of an input while a simulation is running. The device
frequency is in Hz. A frequency input is a special case, which is only used in conjunction with
the threshold trigger SFB.
Analog
You can preset the value for the analog input (Page 196) or modify it while running in
simulation mode. The units for the analog value corresponds with the default process
variable. The range corresponds with the specified measurement range, provided you have
selected the option of "Auto range". The value range corresponds in this case with the
measurement range of the function connected to the input. The analog input represents a
special case for analog SFBs.
Refer to the information in the "Analog value processing" section (Page 286) for help on
Refer to the information in the "Analog value processing" section (Page 286) for help on
analog block parameters.
Settings
When you save your circuit program, you also save the simulation settings. Thus, you do not
need to enter the simulation parameters once again when you exit and reopen your circuit
program.
While simulation mode is active, you can click a digital input in the list of input switches to
While simulation mode is active, you can click a digital input in the list of input switches to
change its settings. From the drop-down list select Switch, Momentary pushbutton (make),
Momentary pushbutton (break) or Frequency. Use the OK button to enter your settings.