Техническая Спецификация для Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8

Модели

6ED1057-3BA00-0AA8

User interface

2.8 Menu bar

LOGO!Soft Comfort Online Help

Operating Instructions, 06/2014

●  Momentary pushbutton (break)
●  Frequency
You have only one option for the analog inputs:
●  Analog

Name column

Switch

A switch latches when actuated and is released by actuating it once again.

Momentary pushbutton

A momentary pushbutton is only active while it is held down. The contact opens as soon as

you release the button.
You can determine a make or break action for the pushbuttons.

Frequency

You can preset or change the frequency of an input while a simulation is running. The device

frequency is in Hz. A frequency input is a special case, which is only used in conjunction with

the threshold trigger SFB.

Analog

You can preset the value for the analog input (Page 196) or modify it while running in

simulation mode. The units for the analog value corresponds with the default process

variable. The range corresponds with the specified measurement range, provided you have

selected the option of "Auto range". The value range corresponds in this case with the

measurement range of the function connected to the input. The analog input represents a

analog block parameters.

Settings

When you save your circuit program, you also save the simulation settings. Thus, you do not

need to enter the simulation parameters once again when you exit and reopen your circuit

program.
While simulation mode is active, you can click a digital input in the list of input switches to

change its settings. From the drop-down list select Switch, Momentary pushbutton (make),

Momentary pushbutton (break) or Frequency. Use the OK button to enter your settings.