TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트

 

Enter the static router ports for this VLAN. Static router ports will 
not be aged. 



Select the VLAN ID you want to change. 

Displays the VLAN ID. 

Displays the router port aging time of this VLAN. 

Displays the member port aging time of this VLAN. 

Displays the immediate leave function of this VLAN. 

Displays the static router ports of this VLAN. 

 

Dynamic Router 
Ports： 

Displays the dynamic router ports of this VLAN. 

1.  The VLAN configuration will take effect when global MLD Snooping function is enabled and the 

corresponding VLAN is created. 

2.  When the router port aging time or member port aging time is set for a VLAN, this value 

overrides the value configured globally. 

3.    You should only use the Immediate-Leave feature when there is a single receiver present on 

every port in the VLAN. If the immediate leave function is enabled on a port with several 
listeners in the same IPv6 multicast group, these listeners will fail to receive the IPv6 multicast 
packets after one of them leave this group. 

When the switch receives MLD report messages, it examines the multicast filtering ID and filter 
mode configured on the access port to determine if the port can join the multicast group. If the port 
can join the multicast group, the switch will add the port to the forward ports list of the multicast 
group. Otherwise, the switch will drop the MLD report messages. In that way, you can control the 
multicast groups that users can join in. 

Choose the menu Multicast→MLD Snooping→Filter Config to load the following page. 

The following entries are displayed on this screen: 



126