TP-LINK JetStream TL-SG3424 TL-SG3424 데이터 시트
제품 코드
TL-SG3424
Filter ID:
Enter the Filter ID which identifies the filter.
Start Multicast IP:
Enter the start of the IP range.
End Multicast IP:
Enter the end of the IP range.
Filter List
Select:
Select the filter ID you want to change.
Filter ID:
Displays the filter ID number.
Start Multicast IP:
Displays the start of the IP range.
End Multicast IP:
Displays the end of the IP range.
Note:
The max number of filter entries is 30.
8.2.4 Port Config
On this page you can configure MLD Snooping function with each single port.
Choose the menu Multicast→MLD Snooping→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config
Select:
Select the port you want to configure.
Port:
Displays the port number.
Filter:
Choose to enable or disable filter function in this port.
Filter Mode:
Choose the filter action mode. You can accept or
refuse Report message with specific multicast groups
specify by the filter IDs.
refuse Report message with specific multicast groups
specify by the filter IDs.
127