HP 643169-001 C 사용자 설명서
제품 코드
C
Set the number of rings before answering
If you turn on the Auto Answer setting, you can specify how many rings occur before incoming calls
are automatically answered.
The Rings to Answer setting is important if you have an answering machine on the same phone line
as the printer, because you want the answering machine to answer the phone before the printer does.
The number of rings to answer for the printer should be greater than the number of rings to answer
for the answering machine.
For example, set your answering machine to a low number of rings and the printer to answer in the
maximum number of rings. (The maximum number of rings varies by country/region.) In this setup,
the answering machine answers the call and the printer monitors the line. If the printer detects fax
tones, it receives the fax. If the call is a voice call, the answering machine records the incoming
message.
To set the number of rings before answering
1.
From the Home screen on the printer display, press the Up and Down buttons to select Fax, and
then press OK.
2.
Select Settings, and then select Advanced Settings.
3.
Select Ring Settings, and then select Rings to Answer.
4.
Select up and down arrows to change the number of rings.
5.
Select OK to accept the setting.
Change the answer ring pattern for distinctive ring
Many phone companies offer a distinctive ring feature that allows you to have several phone numbers
on one phone line. When you subscribe to this service, each number is assigned a different ring
pattern. You can set up the printer to answer incoming calls that have a specific ring pattern.
If you connect the printer to a line with distinctive ring, have your telephone company assign one ring
pattern to voice calls and another ring pattern to fax calls. HP recommends that you request double or
triple rings for a fax number. When the printer detects the specified ring pattern, it answers the call
and receives the fax.
TIP:
You can also use the Ring Pattern Detection feature in the printer control panel to set
distinctive ring. With this feature, the printer recognizes and records the ring pattern of an incoming
call and, based on this call, automatically determines the distinctive ring pattern assigned by your
telephone company to fax calls.
If you do not have a distinctive ring service, use the default ring pattern, which is All Rings.
NOTE:
The printer cannot receive faxes when the main phone number is off the hook.
To change the answer ring pattern for distinctive ring
1.
Verify that the printer is set to answer fax calls automatically.
2.
From the Home screen on the printer display, press the Up and Down buttons to select Fax, and
then press OK.
3.
Select Settings, and then select Advanced Settings.
46 Chapter 6 Fax
ENWW