HP 643169-001 C 사용자 설명서

4.

Select Ring Settings, and then select Distinctive Ring.

5.

A message appears stating that this setting should not be changed unless you have multiple

numbers on the same telephone line. Select Yes to continue.

6.

Do one of the following:

●

Select the ring pattern assigned by your telephone company to fax calls.

- Or -

●

Select Auto Detect, and then follow the instructions on the printer control panel.

NOTE:

If the Ring Pattern Detection feature cannot detect the ring pattern or if you cancel the

feature before it finishes, the ring pattern is automatically set to the default, which is All Rings.

NOTE:

If you are using a PBX phone system that has different ring patterns for internal and

external calls, you must call the fax number from an external number.

Set the dial type

Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is Tone. Do not

change the setting unless you know that your phone line cannot use tone dialing.

NOTE:

The pulse-dialing option is not available in all countries/regions.

To set the dial type

1.

From the Home screen on the printer display, press the Up and Down buttons to select Fax, and

then press OK.

2.

Select Settings, and then select Advanced Settings.

3.

Select Dial Type, select Tone Dialing or Pulse Dialing, and then press OK.

Set the redial options

If the printer was unable to send a fax because the receiving fax machine did not answer or was

busy, the printer attempts to redial based on the settings for the busy-redial and no-answer-redial

options. Use the following procedure to turn the options on or off.

●

When Busy: If this option is turned on, the printer redials automatically if it receives a busy

signal. The factory-set default for this option is Redial.

●

When No answer: If this option is turned on, the printer redials automatically if the receiving fax

machine does not answer. The factory-set default for this option is No Redial.

To set the redial options

1.

From the Home screen on the printer display, press the Up and Down buttons to select Fax, and

then press OK.

2.

Select Settings, and then select Auto Redial.

3.

Select the appropriate option, and then press OK.

ENWW

Change fax settings 47