Benq TW526 9H.JCH77.14E 데이터 시트
제품 코드
9H.JCH77.14E
Maintenance
49
Replacing the lamp
Turn the power off and disconnect the projector from the power outlet. Please contact
service personnel for changing the lamp or visit
http://www.BenQ.com
.
Resetting the lamp timer
After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM
After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM
SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp
Settings page appears. Highlight Reset Lamp Timer. A warning message appears asking
if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp
time will be reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.