Horstmann C-Stat ZW 설치 가이드
Procedure B
1.
On the C-Stat programmable stat, Press ENTER twice
2.
Press '-' or '+' to select SETUP
3.
Press ENTER
4.
Press '-' or '+' to select SET UP Z-WAVE
5.
Press ENTER
6.
Press '-' or '+' to select NETWORK RESET
7.
Press ENTER
8.
Press ENTER again to confirm and NETWORK RESET
COMPLETE will appear on the display
9.
Press BACK to go back to SET UP Z-WAVE
10.
Press ENTER
11.
Press '-' or '+' to select EXCLUDE NODE / RECEIVER
12.
Press ENTER
13.
Go to the Powered ASR-ZW receiver, press and hold the
network button
14.
EXCLUDING will appear on the display of the C-Stat
15.
When completed NODE / EXCLUDED will appear on the
display.
16.
The red network light on the ASR-ZW will start flashing
17.
Once the red light is flashing follow Procedure A on page
11
12